About the selection of the sweeper line

The sweeper refers to the sweeping robot. In the near future, it will become an indispensable cleaning helper for every family like white goods. Products will also develop from primary intelligence to a higher degree of intelligence, gradually replacing manual cleaning.

With the continuous improvement of living standards in China, the sweeping robots that have been sold in the European and American markets have entered the homes of ordinary people and are accepted by more and more people. As the cleaning assistant of the company, the sweeper greatly improves the cleaning efficiency and cleaning effect of the road, but when the sweeper fails, it is more annoying, so is it a problem with the selection of the line?

The general problem with the sweeper is that it does not move. Therefore, the wire we use for the sweeper must pass the quality, and the wire from the master manufacturer is a product that has passed the quality inspection. Check whether the key switch has activated the sweeper and the sweeper’s key. After the switch is turned to the right, if you hear the start of the sweeper, it means that the sweeper has not started just now; if there is no sound after starting the sweeper, the key switch is damaged, or the fuse of the sweeper is blown, so you need to replace the key switch Or replace the fuse. Of course, it may be that the wiring of the key switch is loose or broken. Just replace the wiring or tighten the wiring. The key switch, fuse, and wiring are all OK, and the sweeper still does not work, indicating that the battery is abnormal and the battery cannot supply power. , Check if the electricity meter has electricity, first charge it, if the sweeper can go after charging, it means that the electricity meter is damaged and cannot display the real electricity, and the electricity meter needs to be replaced; if the sweeper still can’t drive, there is a problem with the battery , Replace the battery; the tire is solidified and wrapped around the sweeper and does not drive, but the noise is loud, indicating that the tire is entangled and locked. Forcibly starting the sweeper will cause damage to the engine load and solve the tire entanglement. If it is not the wiring problem, it may be the installation and internal problems of the machine itself. The above questions are for reference only.